Following the completion of your in-progress Analog + Digital Interactions prototype, and Prototype Proposal Draft, Complete the 10/5/1 ideas exercise described here.

Prepare an initial version of your Analog + Digital Interactions prototype as well as a Prototpye Proposal draft.

brief

Create a prototype in which an audience member/user is prompted to interact with at least two sensors in order to control/change at least two possible outputs. While the specifics are up to you one general goal for this project is to create a context/story that incentivizes interaction with...

A voltage divider is a circuit that produces an output that is smaller than its input (where the output is voltage or current).

The above schematic represents the most basic way to use two resistors (labeled as Z1 and Z2) to take some voltage (Vin) and output a fraction of it (Vout). The...

GPIO

(Note: image sourced from here)

The ESP32 has a variety of pins, each of which perform different functions. For example, last week we looked at 3V and GND, pins which give us access to the power and ground on the device respectively.

The photo above highlights a number of pins t...